Using the Revisions tool for teamwork

Technical Note #15

June 2016
By Dimitris Triantafyllos

When dealing with large networks, particularly when working to tight deadlines or on complex projects, it can be useful to have several people working on the same model at the same time. In Aimsun, the Revisions tool makes collaboration faster and means the whole team can work in a single file, which reduces errors and duplication of effort.

Here’s a quick guide to getting the most out of Revisions:

Prepare the network

The network should have as many areas as revisions (and modelers in the team). These areas need to be well defined and separated by a buffer zone; this buffer zone helps to avoid changing objects that are not in your area, which is why the buffer zone should include at least two nodes.

areas need to be well defined and separated by a buffer zone

Areas need to be well defined and separated by a buffer zone

Each user focuses solely on their working area and must be careful not to delete any objects outside their boundaries.

Create a Revision

To create a new Revision, select Project < New Revision:

To create a new Revision, select Project < New Revision

To create a new Revision, select Project/New Revision

In the Create New Revision dialog, locate the Base Network, give the revision a name and specify its location. The folder should be accessible to the whole team.

For each revision, set a New Initial ID. The ID of every new object created in the revision will begin with this number. In our example, the first new object created in Revision 1 (named “Claudia”) has ID 3.000.000, the second object has ID 3.000.001, and so on. Meanwhile, in Revision 2 (“Carles”), the new object IDs all start with 5.000.000.

For each revision, set a New Initial ID

For each revision, set a New Initial ID

Click to enlarge: For each revision, set a New Initial ID. In this case ‘Carles’ (left) and ‘Claudia’ (right).

It is important that every Revision should have a different New Initial ID and that these numbers should be separated enough to avoid having objects with the same ID in the different revisions.

The same goes for the object’s name: name each one (you can use the team member’s names as we have done here – Claudia and Carles – or just Revision 1, Revision 2 etc.) so that all objects from all the Revision Regions will have different names.

Edit Revisions

In each revision you can edit, delete and create new objects such as geometry objects (sections, nodes, roundabouts…), reserved lanes or section objects (detectors, controllers, stops…).
Pay special attention to:

  • Control Plans
  • Subpaths
  • Public Transport Lines
  • Signal Groups
  • Traffic Demands
  • Traffic Management
  • Scenarios
  • Sections belonging to a subpath or a Public Transport Line
  • Any object that may belong to another object affecting the whole network (and thus, the other Revision Regions)

Look in the Project/Revision Info window after finishing your revisions so that you can see all of the changes that you’ve made in Added Objects, Changed Objects and Deleted Objects. This window will show you if you have accidentally edited or deleted an object outside your working area.

Merge Revisions

Once you’ve done all the editing in each revision, the next step is to merge all the revisions to the Base Model. First merge one Revision (“Revision 1”) to the Base Model, and then merge another revision (“Revision 2”) with the merged file (Revision 1 + Base Model), and so on.

Merge all the revisions to the Base Model

Merge all the revisions to the Base Model

Once you have merged all Revisions in the Base model, you’ll be left with a network updated with all changes made by each person working on the modelling team.

This tool can dramatically reduce the time a modelling team needs to work on a network and particularly comes into its own for large-scale, complex projects.

More technical notes

Geometry Configurations Part 1 – Workflow

December 2015: Andreu Tarrida brings you the first in a four-part series on the Geometry Configurations feature – this note introduces the topic and gives you a brief tour of the workflow.

My model is in the Atlantic Ocean

“My model is in the Atlantic Ocean!”

Tessa Hayman guides you on how to set the coordinate reference system correctly in your Aimsun Next model.

  • Got a question? Get in touch.

    We are here to help!


Cite Aimsun Next

Aimsun Next 24

Aimsun (2024). Aimsun Next 24 User’s Manual, Aimsun Next Version 24.0.0, Barcelona, Spain. Accessed on: April. 16, 2024. [Online].


Aimsun Next 24

@manual {AimsunManual,
title = {Aimsun Next 24 User’s Manual},
author = {Aimsun},
edition = {Aimsun Next 24.0.0},
address = {Barcelona, Spain},
year = {2024. [Online]},
month = {Accessed on: Month, Day, Year},
url = {},

Aimsun Next 24

T1 – Aimsun Next 24 User’s Manual
A1 – Aimsun
ET – Aimsun Next Version 24.0.0
Y1 – 2024
Y2 – Accessed on: Month, Day, Year
CY – Barcelona, Spain
PB – Aimsun
UR – [In software]. Available: