Real-time simulation training for traffic managers

Mohammad  Saifuzzaman

Product Specialist

Alex Torday

Chief Executive Officer

When Main Roads Western Australia installed the STREAMS traffic management system, the staff needed to learn how to use it in a risk-free environment: Aimsun’s simulation software provided a safe and efficient digital training ground.

Everybody loves getting a technology upgrade, but there’s usually an initial challenge in learning how to use new tools. Main Roads Western Australia aced exactly this problem when they installed the STREAMS® traffic management solution in the Perth Road Network Operations Centre.

STREAMS allows operators to manage the motorway and incident response, ramp metering and other traffic services from a single system. Developed by Transmax Pty Ltd, STREAMS has a great track record, with documented improvements in peak flows and substantial reductions in travel time and motorway incidents. These enhancements have a knock-on effect of lowering emissions.

With results like this, naturally traffic managers are keen to maximise benefits as soon as possible and train operators in how to get the most out of the system in every possible scenario. It is clearly inefficient to wait for incidents to happen on the road before learning how to manage them – operators need to test STREAMS ahead of time across a range of scenarios while exploring all possible options offered by the new traffic management tool.

 By learning in a highly realistic simulated environment, operators can gain expertise with new systems and software while the real world outside flows as normal.

Aimsun Next replaces the physical vehicle detection system that is required for STREAMS’ operation by simulating the traffic detection data instead. It also receives any traffic management actions shown in the overhead gantries (known as Lane Use Message Signs or LUMS) and ramp metering values in real time from STREAMS. Driver behaviour is updated accordingly, based on the LUMS display.

A key feature of this interface is the ability to repeat scenarios many times, as operators can re-run any traffic incident over and over again and try out different strategies. The real-time traffic animation mimics the traffic monitoring cameras with some added benefits such as zooming and following the traffic. By trying different solutions within the simulation, the operator will already have a good idea of what to do when faced with a similar situation in real life.

The training allows operators to have hands-on, experience-based training, bypassing the process of learning by trial and error on real roads.

The Toolkit

In one example, the operators were given a simulated incident and lane closure on State Route 2, south of Perth’s Central Business District. The operator had the tools within the STREAMS software to adjust the speed limits, which would then show up in the overhead LUMS gantries. The operators could also inform the upstream traffic about the incident and ask them to avoid any affected lane.

 The Aimsun Next model received the LUMS changes and updated driver behaviour to reflect those changes. The operator was able to watch how the traffic responded, even down to a simulation of an individual vehicle. They could see whether jams built up, the effect on other roads and intersections, and how the traffic cleared once it had passed the road closure. Once they had learned from this, they could go back to the beginning and rerun the scenario, trying out different ways of managing it until they became confident to manage a similar incident in the real world in the most efficient and effective way.

Real time

The integration between Aimsun Next and STREAMS is set up in the Amazon Web Services (AWS) environment, which provides easy access to both systems remotely. All the communications between Aimsun Next and STREAMS happens in real time, meaning the operators can practice as though this were a real event happening right now.

The training allows operators to have hands-on, experience-based training, bypassing the process of learning by trial and error on real roads.

 This tool also provides an excellent opportunity for the road safety team to test and improve their recovery plan in the event of any incident where emergency vehicles might require access. They can test how fast first responders can access the incident location and how STREAMS can help to minimise the delay. The simulation can test the limit of the current facility by changing the location/severity/response time of incident. The interface can also be deployed to plan roadworks and other events where lane restrictions would be needed. 

No longer do operators have to wait for weeks or months on shift before being faced with a new or unusual edge scenario, and their expertise in turn improves the user experience on the roads.

This system has been set up with a specific piece of software in a specific place, STREAMS at Main Roads WA, but the concept could be used anywhere, with any piece of traffic management software. By learning in a highly realistic simulated environment, operators can gain expertise with new systems and software while the real world outside flows as normal.

Aimsun
  • ¿Tienes alguna pregunta? Ponte en contacto.

    ¡Estamos aquí para ayudarte!

  • ¿Tienes alguna pregunta? Ponte en contacto.

    ¡Estamos aquí para ayudarte!

SHARE

Citar Aimsun Next

Aimsun Next 23

Aimsun (2023). Aimsun Next 23 Manual del usuario, Aimsun Next Versión 23.0.0, Barcelona, España. Acceso: 19, 2023. [Online].
Disponible en: https://docs.aimsun.com/next/23.0.0/


Aimsun Next 20.0.5

Aimsun (2021). Aimsun Next 20.0.5 Manual del usuario, Aimsun Next Versión 20.0.3, Barcelona, España. Acceso: May. 1, 2021. [En software].
Disponible: qthelp://aimsun.com.aimsun.20.0/doc/UsersManual/Intro.html

Aimsun Next 23

@manual {​​​​​​​​AimsunManual,

título = {​​​​​​​​Aimsun Next 23 User’s Manual}​​​​​,
autor = {​​​​​​​​Aimsun}​​​​​​​​,
edición = {​​​​​​​​​​​​​​​Aimsun Next 23.0.0}​​​​​​​​​​​​​​​,
domicilio = {​​​​​​​​​​​​​​​Barcelona, Spain}​​​​​​​​​​​​​​​,
año = {​​​​​​​​​​​​​​​2023. [Online]}​​​​​​​​​​​​​​​,
mes = {​​​​​​​​​​​​​​​Accessed on: Month, Day, Year}​​​​​​​​​​​​​​​,
url = {​​​​​​​​​​​​​​​https://docs.aimsun.com/next/23.0.0/}​​​​​​​​​​​​​​​,
}​​​​​​​​​​​​​​​


Aimsun Next 20.0.5

@manual {​​​​​​​​AimsunManual,

título = {​​​​​​​​Aimsun Next 20.0.5 User’s Manual}​​​​​​​​,
autor = {​​​​​​​​Aimsun}​​​​​​​​,
edición = {​​​​​​​​​​​​​​​Aimsun Next 20.0.5}​​​​​​​​​​​​​​​,
domicilio = {​​​​​​​​​​​​​​​Barcelona, Spain}​​​​​​​​​​​​​​​,
año = {​​​​​​​​​​​​​​​2021. [En software]}​​​​​​​​​​​​​​​,
mes = {​​​​​​​​​​​​​​​Accessed on: Month, Day, Year}​​​​​​​​​​​​​​​,
url = {​​​​​​​​​​​​​​​qthelp://aimsun.com.aimsun.20.0/doc/UsersManual/Intro.html}​​​​​​​​​​​​​​​,
}​​​​​​​​​​​​​​​

Aimsun Next 23

TY – COMP
T1 – Manual del usuario de Aimsun Next 23
A1 – Aimsun
ET – Aimsun Next Version 23.0.0
Y1 – 2023
Y2 – Acceso: Mes, Día, Año
CY – Barcelona, España
PB – Aimsun
UR – [En software]. Disponible en: https://docs.aimsun.com/next/23.0.0/


Aimsun Next 20.0.5

TY – COMP
T1 – Manual del usuario de Aimsun Next 20.0.5
A1 – Aimsun
ET – Aimsun Next Version 20.0.5
Y1 – 2021
Y2 – Acceso: Mes, Día, Año
CY – Barcelona, España
PB – Aimsun
UR – [In software]. Available: qthelp://aimsun.com.aimsun.20.0/doc/UsersManual/Intro.html